BGID have been manufacturing, supplying and installing Industrial, Commercial and Security doors, along with other related products for more than 43 years.
Click on the blue tabs below to read more about the ranges on offer.
A double skinned all galvanised steel construction security door and unique cold rolled rebated section steel frame. All BGID steel security door sets are custom made to suit individual site opening dimensions. Doors incorporate a high security continuous full height hinge with security pegs.
An extensive range of vision and ventilation options, along with alternative hardware to suit the doors individual application and usage.
General Steel Security Door Set Specification:
Fire Checker – fire resisting door and frame sets
A double skinned all galvanised steel construction door and BGID’s own unique cold rolled rebated section steel frame. All BGID Fire Checker door and frame sets are custom made to suit individual site opening dimensions. Doors incorporate a high security continuous full height hinge with 2 no. security pegs.
BGID Fire Checker door and frame sets, have been tested to 4 hour fire resistance in accordance with BS476 Part 22: 1987
General Fire Checker Specification:
A fully all galvanised steel construction folding shutter door, designed, manufactured and installed to suit specific site dimensions and requirements. Minimal headroom requirements allow this type of door to be used when headroom limitations preclude the use of a traditional roller shutter door.
Folding Shutter Specification:
Door Leaf: Cold rolled from 0.9 mm galvanised steel – vertically ribbed for strength.
Picket, Hinge, Slide Section & Lattice Bar: All manufactured from cold rolled galvanised steel – thickness varying from 1.2 mm to 2 mm as required.
Top & Bottom Track: Manufactured from 2mm and 3mm cold rolled galvanised steel – the top track supplied with supporting brackets to suit site conditions.
Trolley Assembly: All steel zinc plated construction with pre-lubricated ball race assemblies attached to top of picker assembly.
Bottom Guide: Manufactured from zinc plated steel – fixed to base of picket section and acts as a support for each pair of leaves.
Operation: Usually manual, with suitable locking arrangements, but for larger and therefore heavier doors, powered operation, with single or 3 phase motors couples with a variety of control systems are available.
A fully insulated panel assembly, with a door action that allows the panels to make close contact with neoprene vertical side seals, along with a neoprene horizontal seal at the head, and a neoprene nosing to the bottom of the door, all combine to ensure that our range of Sectional Doors provide the best possible seal when in the closed position.
All Insulated Sectional doors are designed, manufactured and installed to suit site specific dimensions and details.
General Spartan range of Hormann and Indupart, Insulated Sectional Door Specification:
Bar Grilles and Servery Shutters are designed to be aesthetically pleasing, whilst at the same time offering an acceptable level of security as they form a highly visible barrier.
An aluminium lath, punched and glazed, roller shutter door, allowing greater freedom for flexibility of shop front design and layout, by increasing or reducing the level of glazing in the shutter curtain area. Considered to be of more attractive appearance than the galvanised steel lath of other types of shop front shutter.
An economical system for controlling draughts and heat loss in an industrial workshop / factory environment. Curtain is usually of clear material, allowing easy vision from one side to the other. Very easy access through this type of curtain for vehicles, fork lift trucks and pedestrians.
BGID have teamed up with CAME – probably the largest manufacturer of automatic gate operating systems in Europe – to provide a top quality fencing and gate operation system capable of providing strong, secure, but stylish steel fencing, with motorisation of the gates by a variety of power systems each complete with “state of the art” control equipment. CAME equipment conforms to all current Technical and Legislative Regulations.
Continental Shutter is the generic term used to describe a compact, light duty roller shutter – BGID’s Range are unobtrusive roller shutter systems, providing an increased level of security and deterrence – whilst remaining aesthetically pleasing. Equally at home protecting domestic window and door openings, or the same type of window and door on commercial premises. Both spring balanced, manual operation and electric operation are available.
Manufactured by BGID, our Fast Action Door offers high speed and rapid opening and closing movements based on a state of the art design principles. The doors fully adjustable fast action significantly improves heat / cold temperature control, minimising the length of time the opening is exposed. Environmental considerations, such as draught, dust and noise are also much better controlled.
Specification for BGID Fast Action Doors: