|
|
Powder
Coat Paint Finishing by BGID
 •
A modern fully automatic pre-treatment plant
• Pre-treatment and/or etch priming to all materials.
• A state of the art continuous process powder coat plant.
 A
product or component life is significantly affected by the method
used to prepare it prior to powder coating. BGID use a Vixan
Tristar 4 stage pre-treatment plant, ensuring removal of grease
and other oily deposits, as well as phosphating the surface
before powder coating. Allowing BGID to active up to 450 salt
spray hours on aluminium.
|
Pre-treated
products are loaded onto a conveyor, and where appropriate are
etch primed before passing through the RDM purpose built spray
booth area, arranged in opposing format. An electrical charge
is applied to the powder as it leaves the gun ensuring that
it then adheres to the earthed product moving by on the conveyor. |
|
|
Finally,
products pass through the RDM variable temperature heat treatment
plant where the application of heat causes the powder to form
a layer several times stronger than traditional paint
After curing and cooling, all products are appropriately packed
and wrapped before despatch. We can undertake straight forward
sub assembly and finishing operations where required, thus reducing
handling costs and lead times. BGID also offer a local collection
and delivery service.
For larger and more cumbersome components and products, BGID
offer a 3000mm. water wash spray booth, matched to a 3000mm
x 2000mm Box Oven.
|
|
|
|
|
TEL: 0121 559 8666 FAX. 0121 561 5373
BIRMINGHAM GARAGE
& INDUSTRIAL DOORS LTD
UNIT 3, GRIFFIN INDUSTRIAL ESTATE, PENNCRICKET LANE,
ROWLEY REGIS, WEST MIDLANDS,B65 0SN UK.
email:sales@bgid.co.uk
|
|
